We have a full HDCP keys based off our chip. The chips are controlled by our source and will never be turned off. We also have custom firmware for every unit.

Our HDMI is special that we modify the path and its very sharp vs external boxes. We fell external boxes are a very poor solution.

- The 1209 is our best mod set. We can make this projector sharper than the 1209s.

- The high rez mod has 2 stages.

--To use 5 GHZ preamp driver stages to replace the old 500 MHZ on each neck card, Replace all caps with hi-frequency type, upgrade all the supply voltages including the main 150V VPA power voltage.

- Stage 2 add the wire to use the P19lug. ( this is only necessary if using the P19lug tubes)

We highly recommend both stages for best picture but not necessary as the mods will improve a normal barco tube as well.

A p19lug will not really improve the picture as much without all the boards being done.

You can use your current tubes with the 7 board mod set then later upgrade to P19lug tubes when they wear out.

The mods will make the picture much better

Please call me I can answer more questions and talk about discounts.